Logo Lampert

Electrodes

The PUK electrodes "WLa"

 

All electrodes from Lampert are non-radioactive and are significantly less environmentally harmful than the thoriated electrodes frequently used in welding engineering.

Our "classic" for PUK welding – the "WLa" tungsten electrode

  • Due to the good service life and equally good strike characteristics, for many years now we have been using tungsten electrodes, which contain not only a range of mixed oxides but also an increased portion of lanthanum oxide (La2O3).
  • The electrodes are highly suitable for universal use and are very well-suited for welding unalloyed and high-alloyed steels, as well as aluminium, titanium, nickel, copper, tin and precious metal alloys.
  • These "WLa" electrodes have proven themselves for PUK welding and also deliver outstanding value for money.

"WLa" electrodes are available in three different diameters*:

 

*Bigger diameters on request.

Ø 0.5mm x 50mm –  No. 100 410

 

  • The proven benchmark for everyday tasks in jewellery production.
  • Particularly well suited for low and moderate welding power.

Ø 0.6mm x 50mm  –  No. 100 411

 

  • Universally applicable for fine work and for welding with higher power.

Ø 0.8mm x 50mm  –  No. 100 413

 

  • Particularly well suited for welding with high power.
  • Lowest electrode resistance, meaning the greatest power transfer.
    (A matching chuck no. 100 157 is required for size 0.8mm)

The special "INOSTAR"® tungsten electrode

 

A particularly special innovation is the "INOSTAR"® electrode, which has been available since 2015.

  • This electrode is alloyed with rare earths (mixed oxides) and stands out due to the exceptional strike characteristics, high current carrying capacity and lengthy service life.
  • The electrode tip retains its shape for longer with the even higher current carrying capacity,because the melting loss is lower.
    The result of this is an even cleaner weld seam.
  • The likewise thorium-free, non-radioactive electrodes can be used across the entire power range with the welding of unalloyed and high-alloyed steels, as well as aluminium, titanium, nickel, copper, tin and precious metal alloys.
  • They are therefore ideally suited for the requirements of PUK welding.

"INOSTAR"® electrodes are also available in three different diameters:

Ø 0.5mm x 50mm  –  No. 100 440

 

  • The proven benchmark for everyday tasks in jewellery production.
  • Particularly well suited for low and moderate welding power.

Ø 0.6mm x 50mm  –  No. 100 441

 

  • Universally applicable for fine work and for welding with higher power.

Ø 0.8mm x 50mm  –  No. 100 443

 

  • Particularly well suited for welding with high power.
  • Lowest electrode resistance, meaning the greatest power transfer.
    (A matching chuck no. 100 157 is required for size 0.8mm)

Downloads

Here you can find additional information on our welding units available for download

Testimonials:

Dean Irvine

Artisan Jeweller
West Kempsey, Australia

Lampert PUK a must for every Jeweller

 

 

 

read more 

Lampert PUK a must for every Jeweller

 

I invested in a PUK 5 welder and was able to obtain a pay back within 6 Months. The PUK enables me to do additional repair and restoration of jewellery over traditional flame soldering methods through less heat dispersion, pinpoint control and seamless joints. I selected the PUK 5 over other welders for its quality, support service, no maintenance requirements and end welding results.

Gregory J. Lafford

Jeweller/Goldsmith
Ballyfin, Ireland

The PUK proves itself invaluable – no matter the metal or alloy.

 

 

read more 

I have used various models of the PUK over the past 15 years and currently have a PUK5 at my bench. I have yet to find a more versatile machine for a jeweller’s workshop. Only imagination limits application where the PUK is involved. Whether its mounting, repair work, stone setting, engraving, or otherwise, the PUK proves itself invaluable – no matter the metal or alloy.

 

Sceptical? Drop by my workshop and see for yourself.

Min-Ling Hsieh

Goldsmith
Taipei, Taiwan

I must say that nowadays working without PUK is unthinkable for me!

 

 

read more 

I made first experience with a PUK back in 2003 in State Drawing Academy Hanau. It was the PUK111 and I instantly fell in love with it.

With PUK’s help I can realize any of my ideas. It makes welding of different metals and combining them with different materials a lot easier. Especially since I often use very thin metal sheets and wires, the PUK is the perfect tool for me.

I had different PUK models in my workshop already – the PUK 3s, PUK 04 and now the PUK5 – and every new model has offered an increased accuracy and improved welding results.

That is why the PUK has become one of the most important pieces of equipment in my workshop.

I must say that nowadays working without PUK is unthinkable for me!

Luca Cristino

Goldsmith
Germagnano, Italy

I think every goldsmith workshop needs a PUK to speed up the jewellery repairs and production.

 

 

read more 

You may take anything but my PUK from me!!!


I use it for everything made of gold, silver, steel, titanium and platinum.
I work easily on claws without having to remove the stones before.


The PUK is perfect for fixing the parts prior to soldering, for different micro repairs and also allows me to work on watches (crowns, shafts, gears and bracelets).


My PUK is a PUK3s professional plus and since I bought it, it paid for itself within the first six months already.


I think every goldsmith workshop needs a PUK to speed up the jewellery repairs and production.

Mark Sansom

Goldsmith
Birmingham, United Kingdom

I regard the PUK as an essential tool for manufacturing and repairing jewellery and can't imagine working without it.

 

read more 

Doing jewellery repairs, the ability to add small areas of metal is vital and was missing for the first 25 years of my time as a jeweller.
Then I heard about the welders that were becoming available so I bought a Lampert PUK3S and several years later I am still using it for most of the repairs that I do.
It paid for itself in the first year because it saves me so much time.
It opens up new possibilities such as repairing bracelets without having to refinish them all over, retipping stones like emeralds without removing them, tacking things together before soldering, repairing porosity etc. In most cases it's faster and cleaner than soldering.

I regard it as an essential tool for manufacturing and repairing jewellery and can't imagine working without it.

Lee Molseed

Goldsmith
Kingsbridge/Devon, United Kingdom

The PUK has saved me so much more time allowing me to do more work in a day improving productivity. No goldsmith should be without one.

 

read more 

I have been a goldsmith for 10 years now.
I was taught the old fashion way by a master craftsman from the Birmingham jewellery quarter
Now with this fantastic new PUK I have moved away from using a naked flame and I mainly use my PUK for most of my repairs, its faster, cleaner and when working on some delicate stones such as opal or emerald, the repair is always safe.
It has also saved me so much more time allowing me to do more work in a day improving productivity.
No goldsmith should be without one.

Gabby Williamson

Dental Technician, Toowoomba (QLD), Australia
www.ToowoombaOrthodontists.com.au

Orthodontic soldering is now a thing of the past. The possibilities are endless with the PUK D2 TIG welder, many jobs were not possible when I was limited to soldering.

read more 

Orthodontic soldering is now a thing of the past. TIG welding is far superior in every way. The possibilities are endless with the PUK D2 TIG welder. Preparation is minimal and joins are stronger and smoother than soldering.

 

Since I have been using the PUK D2 I have not had any appliance breakages. Many jobs were not possible when I was limited to soldering. Now I can add small attachments to my appliances with little distortion from overheating. Intricate designs are easily and quickly added to any job with minimal preparation. Almost no finishing and polishing is needed saving much time and money. Working under the microscope makes welding much more precise.

 

Not only is this PUK D2 excellent, the Lampert ambassadors are also very helpful. I had many conversations with them and they were more than happy to help. They always urged me to keep in touch as they want everyone to appreciate this machine as much as they do.

David Fried

Multidisciplinary artist, New York / Düsseldorf
www.atelier-fried.com

PUK not only solved many of the problems for the specific artworks in mind, it opened the door to many new ideas that are now possible!

 

read more 

"You know how some of your best ideas border on the actual doable technology? As a multidisciplinary artist, my various visions often look beyond that technical border. In many cases I must invent the tools necessary, and pursue with considerable improvisation and limitations over years. In 2013, I wanted to make artworks of pre-polished stainless steel that would be very difficult to polish after normal TIG welding due to narrow access angles.

 

The amazingly different PUK solution: I was very surprised and delighted to find out about the PUK, and was treated to an unusually terrific demo of it in my studio. This is a machine I could never have ‘invented’, or even imagined! And it not only solved many of the problems for the specific artworks in mind, it opened the door to many new ideas that are now possible!

 

And not to be overlooked: the PUK is made in Germany to highest standards, and the support can’t be beat! Lampert has proven to me to be an innovative company that cares about quality, but also knows that what they are producing, solves problems and opens your creativity."

Robert Hallett

Goldsmith, jeweler, designer
Oakmont, Pennsylvania, USA

No seam and no porosity. The PUK was already paying its own way.

 

 

read more 

I have been working with precious metal for almost 50 years and some of my tools were passed on to me by a goldsmith who began work in about 1920. The PUK settled into a workshop where the anvil, planishing hammer and draw plates are used daily.

When the PUK arrived I had a problem to solve. I had just finished a custom ring with a 2.25 carat diamond set in two very wide prongs. I hadn’t gotten quite enough platinum over the diamond to feel secure. After about 5 hours of practice with the PUK I was able to add 0.75mm of clean platinum to the top of the prongs and hammer it down over the diamond. No seam and no porosity. Just like the extra platinum had always been there.

The PUK was already paying its own way.

Victor Magnes

Goldsmith, Johannesburg, South Africa
www.thejeweller.co.za

I not only use my Puk welder for difficult jewellery repairs, it’s used in my workshop every day.

 

 

read more 

Experience with Puk 3 welder at Jewellex 2009:

"I was on a hunt for a tool machine that is going to help me to make life easy doing fine soldering to chains, retipping claws on pieces without wasting too much time or money.

I guess in the last 5 hours of a Jewellex show being the last day, this was going to be a challenge that I never knew was going to make my dream come true. Walking down one of the aisles passing jeweller after show room, I saw a guy doing something weird but it was flashing spark lighting, this drew my attention.

A dream started to unfold at that very moment, I stood and watched this gent looking through a microscope and doing something that had blown me away, welding two pieces of metal together. I started asking questions - can you solder, weld a bracelet together without taking coloured stones out, his reply was 'yes', can you weld new claws on to a ring with stones and or coloured stones again 'yes'! – I asked please can I try, so he stood up and showed me to set up to suite my vision eye focus and I started welding ok at first it was messy, I sat for over an hour experimenting and I was glued to that chair. Honestly, at this time I just had a million mind flashes of what I was going to use my Puk 3 for and how it was going to work for me making life easy and more money with less stress.

Well its now two and a half years later and I have not only used my Puk welder for difficult jewellery repairs, it’s used in my workshop every day. I have also applied it in the Opticians world, helping to repair broken frames of glasses, all makes and metals types. It’s amazing, most repairs you cannot even see the repair, as being a micro weld. The real magic using the Puk there is so little heat you hold the piece in your hand and no burns.

I can just say to the team at Lampert never stop creating new technology you guys are amazing I don’t know what I would do without my Puk welder."

Regards

Victor Magnes
Goldsmith and CEO The Jewellery Connection

Workshops News

You are interested in the possibilities of use of our fine-welding devices? Or you are searching for one or another tip on working with your PUK? Then just sign up for our Workshop-News on this webpage.

 

We do not offer an ordinary advertising newsletter, our only intention is to support our customers. At regular intervals, we present small suggestions or examples for correct work with the PUK, so you may use our technology as efficiently as possible.

 

Show workshop examples

Lampert Werktechnik GmbH
Ettlebener Strasse 27 · 97440 Werneck · Germany
Tel. +49 9722 94 59 - 0 · Fax +49 9722 94 59 - 100 · mail@lampert.info

We use cookies to give you the best possible experience. By continuing to use our website you are giving your consent to cookies being used. Schließen